爱表族论坛

标题: PAM210 洗油拆卸图 [打印本页]

作者: 厦门人 时间: 2007-10-17 22:03:12 标题: PAM210 洗油拆卸图

首先感谢西北强人阿里兄替我把210彻底的洗了一次澡,阿里兄不止修表技术好,拍照也不错!赞一个!

图片附件: 沛1.jpg (2007-10-17 22:03:12, 50.11 KB) / 下载次数 83
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjYzOTd8YWMzM2Y2OWV8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 22:06:35 标题: 图二

[s:101] [s:101] [s:101] [s:101]

图片附件: 沛2.jpg (2007-10-17 22:06:35, 78.53 KB) / 下载次数 55
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjYzOTl8OGZmZjhjNDV8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 22:08:33 标题: 图三

[s:101] [s:101] [s:101]

图片附件: 沛3.jpg (2007-10-17 22:08:33, 68.78 KB) / 下载次数 50
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MDZ8OWZjMTFlYWF8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 22:09:33 标题: 图四

[s:101] [s:101] [s:101] [s:101]

图片附件: 沛4.jpg (2007-10-17 22:09:33, 93.17 KB) / 下载次数 47
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MDd8NzJmNGE0NDF8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 22:11:16 标题: 图五

[s:101] [s:101] [s:101]

图片附件: 沛5.jpg (2007-10-17 22:11:16, 118.01 KB) / 下载次数 44
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MDh8ZDc3ZTEzODR8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 22:13:01 标题: 图六

[s:101] [s:101] [s:101]

图片附件: 沛6.jpg (2007-10-17 22:13:01, 94.1 KB) / 下载次数 45
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MDl8MzYyZjQzNTN8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 22:16:46 标题: 图七

[s:101] [s:101] [s:101]

图片附件: 沛7.jpg (2007-10-17 22:16:46, 79.84 KB) / 下载次数 50
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MTB8NGVlNjdjMTh8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 23:18:04 标题: 图八

[s:101] [s:101] [s:101]

图片附件: 200710170354599.jpg (2007-10-17 23:18:04, 54.47 KB) / 下载次数 27
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MTV8MzAyZWI1MjB8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 23:19:18 标题: 图九

[s:101] [s:101] [s:101]

图片附件: 2007101703533192.jpg (2007-10-17 23:19:18, 71.45 KB) / 下载次数 42
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MTZ8YWFmOWMzNjl8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 23:20:36 标题: 图十

[s:101] [s:101] [s:101]

图片附件: 2007101703710298.jpg (2007-10-17 23:20:36, 89.51 KB) / 下载次数 24
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MTh8ZjhlNWIxZjl8MTcxODg1NTgxNXwwfDA%3D

作者: 厦门人 时间: 2007-10-17 23:22:40 标题: 图十一

[s:101] [s:101] [s:101]

图片附件: 2007101703733194.jpg (2007-10-17 23:22:40, 67.56 KB) / 下载次数 20
http://www.iwatch365.com/forum.php?mod=attachment&aid=NjY0MjB8ODA2NzVkNGR8MTcxODg1NTgxNXwwfDA%3D

作者: jasonji 时间: 2007-10-17 23:39:09

好漂亮的表心啊.多少米啊

作者: 就爱好表 时间: 2007-10-26 00:36:17

没买几天啊，怎么就洗澡了啊，看着心痛的啊，照片拍的没话说啊！

作者: qzhgmrbb 时间: 2007-11-2 20:24:30

真的是碰见高手了！
佩服啊！
果然是技术一流！

作者: wobuzhidao000 时间: 2007-11-2 21:00:17

[s:93] [s:93]

作者: shzslw 时间: 2007-11-4 20:11:21

ＰＡＭ００２１０，看照片是真的，刚买就拆，不会吧

作者: shzslw 时间: 2007-11-4 20:12:20

ＰＡＭ００２１０，看照片是真的，刚买就拆，不会吧，什么原因？不会是为拍照片吧

作者: 陆移01 时间: 2007-11-6 23:03:27

阿里的手艺真好:) :) :)

作者: vico 时间: 2007-11-7 01:24:07

同好，有钱就要做点与众不同的事。

作者: 阿里 时间: 2007-11-7 12:38:37

一点拙技。承蒙厦门兄抬举。与兄同乐。

作者: za_222 时间: 2007-11-7 15:03:42

阿里兄没的说~[s:112] [s:101] [s:120] [s:120]

作者: 130blair 时间: 2007-11-9 13:26:31

结构还真够简单的。。。

作者: billjin 时间: 2007-11-10 23:49:20

好啊！这样的帖子就是要好好顶顶！长见识啊

作者: yuduotian 时间: 2007-11-13 12:41:39

[s:120] [s:120] [s:120] [s:120] [s:120]

作者: 张小E 时间: 2007-12-30 22:29:41

ding厦门人~小弟也是厦门的

作者: 苹果味的饺子 时间: 2007-12-31 02:21:34

[s:120] 强人啊！！！！

作者: hejianzong 时间: 2007-12-31 07:40:17

[s:120] [s:120] 好手艺

作者: hotmer 时间: 2008-1-11 15:26:57

原帖由 130blair 于 2007-11-9 13:26 发表
结构还真够简单的。。。

我也这么认为.....

作者: cplmj 时间: 2008-4-14 00:12:34

好技术[s:120] [s:120] [s:120]

作者: 蓝色海豚 时间: 2008-4-14 11:47:05 标题: 牛人啊！

原帖由阿里于 2007-11-7 12:38 发表
一点拙技。承蒙厦门兄抬举。与兄同乐。

牛人啊！[s:120]

作者: 阿里 时间: 2008-4-17 13:14:15

原帖由 longmaoqu 于 2007-11-8 14:22 发表
高手就是高手，佩服佩服，坛子里好像很多高手都是上海人吧

高手不敢当，业余爱好。
本人兰州人。

作者: jjxing 时间: 2008-4-23 13:54:19

17钻对阿里兄而言可能真的是小意思~

作者: niceman 时间: 2008-4-29 05:56:21

以后腕表洗油也想找阿里，可俺在国外，怎么办呀？:(

作者: who_is_leo 时间: 2008-4-29 09:16:00

高手，高手，高高手。洗油不懂，摄影水平一流！[s:120] [s:120] [s:120]

作者: li007 时间: 2008-6-11 19:22:40

牛人[s:120] [s:120] [s:120] :) :) :)

作者: hhq101 时间: 2008-6-11 19:34:48

果然艺高人胆大！[s:110] [s:120]

作者: yangjing8283 时间: 2008-6-11 19:35:05

非常的好啊，怎么技术这么厉害啊,拆的好,洗的也干净!

作者: niceman 时间: 2008-6-11 20:12:50 标题: 问题

再次读贴，注意到一个问题：

图九清晰可见边缘上有许多碰痕，正常吗？

[ 本帖最后由 niceman 于 2008-6-11 13:22 编辑 ]

作者: watchfans111 时间: 2008-6-14 09:04:54

eta的6497，随便拆，不小心损坏了零件，再买一整个机芯也就１０００RMB不到，正宗瑞士产的，零部件的通用率９５／１００以上，游丝和快慢针等一些零部件注意一下不会有大问题。我自己就拆坏了一个，又买了一个拆零件换上，是人都可以做到。这就是ETA的好处。

作者: danstarks 时间: 2008-7-8 11:52:36

原帖由 watchfans111 于 2008-6-14 09:04 发表
eta的6497，随便拆，不小心损坏了零件，再买一整个机芯也就１０００RMB不到，正宗瑞士产的，零部件的通用率９５／１００以上，游丝和快慢针等一些零部件注意一下不会有大问题。我自己就拆坏了一个，又买了一个拆零件 ...

牛啊[s:120]

作者: mumu6688 时间: 2008-7-29 03:07:19

阿里兄的手艺没话说，不知道以后表要洗油能不能麻烦阿里兄。

作者: xsarajw 时间: 2009-7-19 07:02:46

LZ 献身了! 佩服佩服! 非常感谢!

作者: 凝凝2001 时间: 2009-7-19 19:56:37

;P 是不是冒险了点?[s:87] [s:120]

作者: xsarajw 时间: 2009-7-19 20:10:08

今天又看了一遍, 发现图九有的部分有打磨得花纹,大部分地方没有, 我分析有花纹的的应该是组装后能看到的, 没有花纹的地方应该是看不到的, 不知道对不对？

作者: 徐东东 时间: 2009-7-19 20:42:51

很好的教科书，真是艺高人胆大，[s:120] [s:120] 收录了。[s:93]

作者: 祖国 时间: 2009-7-19 22:37:19

新手感觉：3万多就这么几个零件，有点不平衡。我也有块111，哎！今天看到这个图片感觉不爽。

作者: 早生华发 时间: 2009-7-20 10:24:17

经典好帖 [s:120]

作者: AustinSun 时间: 2009-7-20 10:47:33

6497真的简单,沛如果能把价钱降低的话多好啊.

作者: colourfox 时间: 2009-7-20 13:20:15

..........无语零件真的好少.........

作者: cafeonthedesk 时间: 2009-7-20 13:35:53

這樣的 post 只有一個字︰讚！

作者: 水边风生 时间: 2009-7-20 15:52:21

哎就这么几个零件～～～ ETA～～[s:100] [s:100]

作者: fancy_di 时间: 2009-7-20 22:40:50 标题: 隔壁论坛小弟最佩服的人～～～

阿里兄～:) [s:114] [s:93]

作者: xiaonan26 时间: 2009-7-20 23:50:15

阿里兄弟的技术没的说，在名表就是呵呵
厦门人兄弟很久都没见了。。。。也来爱表了哈哈

作者: 链子 时间: 2009-7-21 09:24:33

拆成这样。。换我还真有点舍不得

作者: panerai0101 时间: 2009-7-21 09:51:39

210的款式还是很经典的，毕竟表盘简洁给人一种纯净美感！
6497的拆卸似乎显得没有以前看的7750之类码表拆卸好看，但是能这样和兄弟们展示成果，还是谢谢兄弟的美图，让我们开眼界了！！！

作者: fzcxlp 时间: 2009-7-21 11:51:42

长见识了，[s:112]

作者: sun_son 时间: 2009-7-21 15:23:59

我就感觉花这么多钱买个6497芯不太值。

作者: mobilep800 时间: 2009-7-21 22:13:49

能否给出所用工具，很有拆卸183的想法。。。。

作者: mobilep800 时间: 2009-7-21 22:27:59

基于6497机芯，应该如此，决定购买时要说服自己的唯一难点，谁让我们喜欢她的外形呢，P在这一系列型号上，确实很marketing。。。。。给大家一些该机芯的历史： 50years

In 1898, Auguste Reymond established his watch company, Manufacture Auguste Reymond in the small town of Tramelan in the center of the Jura Mountain region of Switzerland. He also began to manufacture movement blanks, or ebauches, in 1906. Reymond later gave the name of these ebauches UNITAS, after the UNITAS Watch Company he acquired in 1926. The Depression precipitated by the American Stock Market crash of the late 1920s and early 1930s was felt throughout Europe. The Depression had a profound effect on the Swiss watch industry and August Reymond S.A. did not go unscathed. Sales of his watches plumeted and Reymond was forced to sell his company to a group of investors who managed to keep the company financially viable.
Fortunately, Ebauches SA had been formed in 1926 in Neuchatel as a holding company that brought together Switzerland's largest ebauche firms, which included Valjoux S.A., ETA S.A., Felsa S.A., Venus S.A. and others. Fabrique d'Ebauches Unitas S.A. joined this confederation in 1932. Ebauches SA proved vital to the survival of the ebauche industry in Switzerland. Naturally, Reymond did not make Unitas movements for his watches only, but sold them to other watch manufacturers in Switzerland, just as other ebauche manufacturers did. This helped the company's financial bottom line.

His watch firm's complete name, Auguste Reymond, S.A. was the source of the name for his watches, the acronym ARSA. Reymond also manufactured watches under the UNITAS name. Each Swiss ebauche is stamped with its own unique symbol to identify the manufacturer. The Swiss adopted a stylized shield, within which the ebauche manufacturer would place a letter or letters, or a symbol. The UNITAS stamp used the letter U with a T within, placed within the shield outline (above photo). The caliber number was also stamped on the ebauche.

Photo: courtesty Perseo Watches
ARSA pocket and wristwatches and UNITAS wristwatches were coveted for their accuracy and appreciated for their affordability and style. Over the course of the 20th century, many travelers to Switzerland who owned these watches would travel by train to Tramelan to see the Manufacture Auguste Reymond and perhaps peer into the workshops to see the master watchmakers at work.

In the early 1930s, the Incabloc® movement shock absorber was developed, and it revolutionized movement durability and maintaining accuracy. It was adopted by virtually all Swiss movement manufacturers. It has been refined over the decades since and is the premier method of protecting Swiss watches from severe shock. UNITAS incorporated the Incabloc® system in their movements. Among them is the UNITAS 6497 and 6498 pocketwatch movements designed in the 1950s. The 6497 and 6498 calibers became regarded as among the best pocketwatch movements ever designed for their ruggedness and accuracy.

Along with the UNITAS 6497 and 6498 movements, the company also developed braille wrist and pocket watches for the blind, and a line of "jumping hours" watches with unique hour indication on the dial which were also developed during the 1950s.  The fifties, sixties and seventies were the golden decades of Swiss watchmaking when the industry experienced unprecedented prosperity.  The August Reymond S.A. building had become landmark in Tramelan and one of the largest employers in the town. However, a technological revolution was brewing that would shake the Swiss watch industry to its foundations.
When SMH was formed in 1983, Ebauches SA became ETA SA Fabriques d'Ebauches.  This proved vital to the survival of the watch industry with the onslaught of the quartz revolution in the late 1970s and early 1980s. Auguste Reymond S.A. however, did not survive the arrival of inexpensive and highly accurate quartz movements.  Sales of mechanical watches plunged while watches with quartz movements soared.  The company had to be liquidated and its assets sold off.  The tools and related equipment for the UNITAS 6497 and 6498 pocket watch movements were acquired by ETA.  With the consolidation of the Swiss watch industry during this tumultuous period, many smaller watch companies closed their doors, unable to compete with inexpensive Japanese quartz movements. When Ebauches S.A. absorbed Unitas, Valljoux and other manufacturers within ETA S.A, many of the original ebauche names and calibre numbers were retained.  That is why today, the UNITAS 6497 and 6498 calibers and the Valljoux 7750 and 7751 calibers manufactured by ETA  still carry the name and caliber number of the original ebauche manufacturer.
Fortunately, James Choffat, a former manager of the company, managed to purchase much of the company's parts, movements, tools and equipment in an effort to keep the Auguste Reymond name alive.  It was no longer feasible for the surviving company to remain in the same building it had occupied since 1910.   Manufacturer Auguste Reymond moved from its original building to a smaller, more modern building in Tramelan and in 1989 the company was purchased by  Nitella S.A. another watch factory in Tramelan.  Today, it is under the direction of Thomas Loosli. Many of the newer models in the Auguste Reymond catalog are his designs.

The UNITAS 6497 (shown at left) is experiencing a resurgence today as a movement for wristwatches. At a whopping 16.5 ligne, it requires a massive case--just the thing for those wanting a manly watch. Both the UNITAS 6497 and 6498 movements remain the premier movements for mechanical pocket watches. A couple of years ago, Auguste Reymond began to offer a limited edition series of wristwatches, using original, new old stock UNITAS movements that have been, in the words from their current catalog, "...thoroughly restaured, redecorated and individually numbered." The limited edition model for 1999 was the Ballad, using the UNITAS 6580 hand-wound movement manufactured in the 1960s with date at three oclock and small second hand at six oclock. The Ballad features a rectangular, sculpted case with round saphire caseback so the beautiful 17 jewel movement can be seen. Production was limited to 999 pieces. The creativity and quality of August Reymond pocket watches and wristwatches will ensure this company will be around well into this new millennium.

作者: motomoto 时间: 2009-7-23 22:22:00

楼主有真功夫[s:120]

作者: xiaopangyu99 时间: 2009-7-25 11:43:07

我也是有拆卸手表的冲动，要找个几百元的机械表练练手，哈哈

作者: AustinSun 时间: 2009-7-26 09:24:30

我想知道,这表在国内保养一次多少费用啊?

作者: sjwyzp 时间: 2009-8-4 22:28:03

[s:120] [s:120] [s:93]

作者: 链子 时间: 2009-9-28 01:00:56

这手艺活儿....

作者: jack870912 时间: 2009-9-28 19:39:30

太吊好表
.........

作者: 迪通拿铁 时间: 2010-4-9 14:54:30

定一定更健康[s:92] ;P :@ :L

作者: FLYYXY 时间: 2011-4-25 11:38:57

阿里兄果真名不虚传啊

作者: hsiujan 时间: 2011-4-25 14:55:45

阿里兄功力深厚啊！:@

作者: WANGSKY 时间: 2011-4-25 15:03:57

恭喜LZ给小沛洗了一次澡 LZ这是带了多久才洗油的？

作者: 16207 时间: 2011-4-25 22:30:13

这技术不服不行 [s:92] [s:92] [s:92] [s:92]

作者: 大表迷 时间: 2011-4-27 19:34:26

有点不明白，为何沛表还用有卡度游丝

作者: vikingvip 时间: 2011-4-28 00:39:24

阿里师傅手艺和摄影技术俱佳~~没的说~~:@

基础知识版的刘版也是年轻有为~~~

都是表友幸事~~~;P

作者: 风中的狗尾草 时间: 2011-4-28 12:21:45

[s:92] [s:92] [s:92] [s:92] [s:92] 很漂亮的机芯

作者: wlldb 时间: 2012-4-23 08:41:17

表芯比表靓多了。

作者: apaulzhang 时间: 2012-4-23 10:09:44

绝对强人！！！

作者: David_yang 时间: 2012-4-23 10:12:33

我也想洗油如何联系阿里？

作者: orlian 时间: 2012-4-23 15:36:45

强人！！

作者: zcjggcs 时间: 2012-7-11 15:02:17

谢谢楼主分享！

作者: qdzhouyu1988 时间: 2012-7-12 12:29:30

机芯构造简单，耐造！

作者: yingyang 时间: 2012-8-11 14:47:44

还真敢拆啊

作者: David_yang 时间: 2012-8-11 14:53:16

求兰州阿里联系方式~~~

作者: ken02447 时间: 2012-8-12 10:29:50

:@:@:@

作者: q290752914 时间: 2012-8-14 16:35:07

摆轮，防震器都没有拆，怎么能洗干净表？

作者: 天上菲 时间: 2013-3-24 09:27:07

看了这个好像没那么中毒了

作者: leicamp 时间: 2013-6-12 12:21:07

提示: 作者被禁止或删除内容自动屏蔽

作者: michico_mei 时间: 2013-6-12 13:04:10

片子拍得太清楚了其实这么看来P9000真是一款打磨粗糙的自产机芯啊~ETA的机芯比它精细多了

作者: yokada 时间: 2013-6-12 13:06:19

LZ高手啊

作者: 崔弟大人 时间: 2013-6-13 21:30:35

如果我把表拆成那样只能用两个字形容～！那就是“报废”～！

作者: hsiujan 时间: 2013-6-13 21:42:45

michico_mei 发表于 2013-6-12 13:04
片子拍得太清楚了其实这么看来P9000真是一款打磨粗糙的自产机芯啊~ETA的机芯比它精细多了

这是ETA6497机芯，不是P.9000机芯

作者: lovepanerainy 时间: 2013-6-14 01:04:14

hsiujan 发表于 2013-6-13 21:42
这是ETA6497机芯，不是P.9000机芯

haha..说的对:a20

作者: linchiennan 时间: 2013-6-14 09:17:01

真棒！谢谢分享！！

作者: 馒头簸箕 时间: 2013-6-14 10:13:04

6497本来就是给学徒们入门学习的。

作者: davidsaw99 时间: 2013-6-14 10:34:49

哈哈！

见识见识，
ETA6497机芯，也比较简单。。

:@:@

作者: michico_mei 时间: 2013-6-16 21:06:49

hsiujan 发表于 2013-6-13 21:42
这是ETA6497机芯，不是P.9000机芯

我的意思是你的6497机芯看起来打磨很漂亮比P9000强

作者: michico_mei 时间: 2013-6-16 21:07:46

lovepanerainy 发表于 2013-6-14 01:04
haha..说的对

虽然我没有很多大海但是我还是能分得清哪个是6497哪个是P9000 的~您见笑了

作者: Oujianfa 时间: 2013-6-16 21:11:10

hotmer 发表于 2008-1-11 15:26
我也这么认为.....

我也这么认为.....

作者: pigloverain 时间: 2013-7-26 15:29:42

菜鸟提问那是鹅颈吗

作者: joseph314 时间: 2013-7-26 16:45:13

支持阿里兄。。。牛人！图超赞

作者: fogshao 时间: 2013-7-26 16:48:39

厉害啊。。。

作者: wasjwz 时间: 2013-8-6 14:12:43

刚买就拆;P

欢迎光临爱表族论坛 (http://www.iwatch365.com/)